'surface finishes'

We are the leading and dealing of ms erw pipe distributors in chennai. Common sizes for ERW Steel Pipe range from 2 3/8 inch OD to 24 inch OD in a variety of lengths to over 100 feet. Surface finishes are available in bare and coated formats and processing can be handled on site to customer specifications.

FAILED

TMT Bars are thermo-mechanically-treated through leading world tempcore based technology for high yield strength. The process involves rapid quenching of the hot bars through a series of water jets after they roll out of the last mill stand. The bars are cooled, allowing the core and surface temperatures to equalize.

MT Bars are thermo-mechanically-treated through leading world tempcore based technology for high yield strength. The process involves rapid quenching of the hot bars through a series of water jets after they roll out of the last mill stand. The bars are cooled, allowing the core and surface temperatures to equalize.

FAILED

Owing to our vast industry experience, we are offering a wide array of superior-grade Mild Steel Angle. The offered range of metal angles is manufactured utilizing finest quality raw material and advanced techniques. To meet the variegated requirements of the patrons, we are offering these mild steel angles in different grades, standards and finishes.

FAILED

DURASHINE® Liner Profle is an attractive, slightly fitted wall & ceiling cladding for exterior and interior use on straight or curved surfaces. DURASHINE® Liner Profile is manufactured out of high strength steel which has longitudinal fiutes that provide rigidity and strength along the length of the sheet while retaining full fexibility across the width. It can be used with the fiutes vertically or horizontally, however, DURASHINE® Liner Profile is not intended as a roofing material.

FAILED

The protection provided by hot-dip galvanizing is insufficient for products that will be constantly exposed to corrosive materials such as acids, including acid rain in outdoor uses. For these applications, more expensive stainless steel is preferred. Some nails made today are galvanized. Nonetheless, electroplating is used on its own for many outdoor applications because it is cheaper than hot-dip zinc coating and looks good when new. Another reason not to use hot-dip zinc coating is that for bolts and nuts of size M10 (US 3/8") or smaller, the thick hot-dipped coating fills in too much of the threads, which reduces strength (because the dimension of the steel prior to coating must be reduced for the fasteners to fit together). This means that for cars, bicycles, and many other light mechanical products, the practical alternative to electroplating bolts and nuts is not hot-dip zinc coating, but making the fasteners from stainless steel. Galvanized surface with visible

FAILED

TMT Bars are thermo-mechanically-treated through leading world tempcore based technology for high yield strength. The process involves rapid quenching of the hot bars through a series of water jets after they roll out of the last mill stand. The bars are cooled, allowing the core and surface temperatures to equalize.

FAILED